SAFETY WALL
In Michigan, the sheeting must be vertical. Safety Wall is ADA-Compliant. Safety Wall provides safe, continuous detectable guidance for pedestrians, especially for pedestrians with limited vision or mobility issues.
- Smooth, continuous upper surface for safer hand-trailing
- Long cane users can tap confidently – space between bottom of barricade and ground is less than 2″, which reduces the potential for trapped cane tips
- Accepts pedestrian aids like warning lights and Audible
- Information Devices
- Retroreflective sheeting helps guide pedestrians safely through work zones
- Flat vertical surface eliminates obstacles, like those found in most barricades
- Each Safety Wall weighs only 35 lbs. and measures 74″ W x 36″ H
Safety Wall can be used as a single unit to create sidewalk closures. In multiple units, it can create continuous, interlocking, longitudinal channelizer arrays.
Our device will protect pedestrians by providing continuous guidance through the work zone and separation from the construction side. Installers and users will find Safety Wall is an easy device with which to work.
Our device provides the same level of pedestrian guidance as concrete or plastic barrier, but is easier to transport, install, and remove.
SAFETY RAIL
In Michigan, the sheeting must be vertical. Safety Rail is ADA-Compliant.
Safety Rail provides safe, continuous detectable guidance for pedestrians, especially for pedestrians with limited vision or mobility issues.
- Smooth, continuous upper surface for safer hand-trailing
- Long cane users can tap confidently – space between bottom of barricade and ground is less than 2″, which reduces the potential for trapped cane tips
- Accepts pedestrian aids like warning lights and Audible
- Information Devices
- Retroreflective sheeting helps guide pedestrians safely through work zones
- Flat vertical surface (highlighted as shown) eliminates obstacles, like those found in most barricades
Safety Rail can be used as a single unit to create sidewalk closures, OR, in multiple units, to create continuous, interlocking, longitudinal channelizer arrays.
ADA RAMPS
TEMPORARY PORTABLE MODULAR RAMP
The temporary portable modular ramp provides accessible, detectable and safe guidance where pedestrian access routes cross curbs.
Features:
- Each modular section consists of two edge support castings and two boards
- Modular sections connect for ramp length needed with no additional hardware
- Sections are portable at 30 lbs
- Durable cast iron edge support castings are 8″ H x 12″ W
- Edge support castings designed for 2″ x 6″ slip-resistant lumber
- Metal approach plates are 18″ x 48″ with slip-resistant grip tape
- Ramp rated at 800 lb. capacity for 48″ maximum width